|
The 6155A is a 6-digit slave display for use with computers. PLCs, panel meters and other instruments producing serial ASCII outputs to RS-232, RS-422 or RS-485 standards. It is similar in appearance to other NEWPORT« instruments and fits standard 1/8 DIN panel cutouts.  The
6155A-P is a multipurpose 6-digit slave display for use with PLCs,
panel meters and other devices having parallel BCD outputs. It is similar
in appearance to other NEWPORT« instruments
and fits standard 1/8 DIN panel units. 5, 12, 24 and 48 V logic inputs
can be positive or negative logic and accept a variety of signals including
open collector PLC outputs. Data can be user formatted for full parallel
or bit parallel, character serial in a variety of convenient arrangements.DISPLAY FORMAT The standard display format is six 14.2 mm high, seven-segment LED digits separated by decimal points: 8.8.8.8.8.8. The most significant digit (MSD) may be a negative polarity sign. Serial input options permit the display of some simple messages in addition to the numerical data. SERIAL MODE Serial ASCII coded data is accepted into a differential or single ended line receiver at common Baud rates and up to 15 V level. Data accepted is numeric, plus a simple character set (e.g. ░C, Hi, Lo). The 6155AS can be DIP switch programmed to an individual address number, so that up to 15 displays may share a common data line. SPECIFICATIONS DISPLAY TYPE (LED, red light emitting diode) Height: 7 segment, 14.2 mm (0.55") Display: 8 8 8 8 8 8 Polarity: LED bar indicator Decimal Points: 8.8.8.8.8.8. POWER SUPPLY AC: 110/120 220/240 V, 50-60 Hz Power Consumption: 3 watts max. ENVIRONMENTAL Operating Temperature: 0-50░C Storage Temperature: -20 to + 85░C Relative Humidity: 0 to 85% (non-condensing) Protection (as option): IP43, SPC4 (IP54) splash-proof cover MECHANICAL Weight: 500 g PARALLEL INPUTS 6155A-P Signal Inputs: 6 decades of BCD numeric data, active high or active low selected by jumper switch. One mode of operation permits Binary coded inputs instead of BCD Decimal Points: 5 decimal points may be illuminated by external logic inputs or internal jumpers Overload/Alarm: HI and LO indicators lit by logic inputs SERIAL INPUTS 6155A-S Signal Inputs: Serial ASCII coded data wiring at DIP switch selected Baud rate: 300, 1200, 2400 and 9600 Baud; 1 start bit, 8 data bits (or 7 bits plus parityûparity ignored), and 1 stop bit SIGNAL INPUTS TTL: 2 V min = Logic 0.6 V Max = Logic 0 LOGIC 0 Input Current = -1 mA Max V in Max. = 15 V To Order (Specify Model No.) Prices Shown in U.S. Dollars
|
Panel Mount
